TECNARE MH-4000 Owner's Manual page 7

Rear panel:
Bridge
CH-B OUTPUT CH-A
Selecting Stereo / Parallel / Bridge Mode
Stereo Mode
Each channel within the pair remains independent, and each may be used for a different
signal.
Parallel Mode
Parallel
This setting connects both inputs of a pair together. One signal feeds both channels. Do
not connect different sources to each input. Each channel s gain control and speaker
Bridge
Stereo
connection remain independent.
Bridge Mode
This setting combines both channels of a pair into a single channel with twice the output
voltage. Use only the first channel s input and gain control. Set the second channel s gain
control at minimum.
Output Connectors
Power amp has two output channels. Channel A and Channel B is provided via
which SPEAKON-type output connectors.
SPEAKON CONNECTOR
SCHEMATIC DIAGRAM
1+
AMP OUTPUTS
A B
1+ 1-
1-
2+ 2-
NOT CONNECTED
2+
,
06
2-
,
,