Calibrate The Front Brake - Schwinn Arrow 13-SC112 Owner's Manual

CALIBRATE THE FRONT BRAKE

WARNING!
Incorrect brake calibration or not having the brake
engaged may cause the stroller to fail to stop and result
in serious injury or death. Always check the brakes are
functioning properly before use.
❶ Lower the brake quick release lever and close the front
brake. Figure 3.5
❷ Spin the wheel and make sure the brake pads do not rub and
are correctly aligned.
❸ If the alignment is not correct then loosen the brake pad nut,
spin the wheel and align the brake pad. After correctly
aligning the brake, hold the brake pad in place and re-tighten
the brake pad nut.
❹ If the brake pads are rubbing against the wheel, turn the
barrel adjuster a few turns.
❺ If the barrel adjuster has been turned all the way and the
pads still touch the wheel, the cable will have to be adjusted.
❻ Loosen the cable anchor nut. Using pliers, pull the loose
cable until taut and so the pads are at the correct distance.
Re-tighten the cable anchor nut
Cable
Quick
release
lever
Barrel adjuster
Brake
pads
Brake
pad nut
Figure 3.5
8