NetScreen Technologies NetScreen-25 Installer's Manual page 14

• Power Outlet: Use the outlet to connect power to the NetScreen-25 with the
supplied power cable.
AC Power Supply: Input Voltage: 90 to -264 VAC
Input Frequency: 47 to -63Hz
• On/Off Switch: Turns the power to the NetScreen-25 on or off.
Caution
Make sure you have read the
Warnings",
1. To replace a failed fuse on the NetScreen-25 it is necessary to take the device
off-line, turn the power switch off and disconnect the power cable.
2. Using a screwdriver, separate the lid of the external fuse cover from the
surface of the power outlet, as shown in
Figure 1-5 Screwdriver Applied to NetScreen-25 Power Panel
3. Manually remove the fuse assembly from the NetScreen-25.
Appendix A, "Safety Recommendations and
before you begin installation.
Figure 1-5.