Table of Contents
Advertisement
SmArtINtEr@CtIvEtvANDHomENEtworK
wirelessnetworksettings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
» Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automaticconnection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1 Open the menu with »mENu«.
2 Select the line »CONNECTED APPS« with
»
« or »
« and press »oK« to confirm.
v
Λ
– T he »CONNECTED APPS« menu appears.
CONNECTED APPS
inter@ctive Applications
Network Settings
Connection Type
Select Access Point
Network Configuration
IP Address
DNS
Netmask
Gateway
Exit
Back
3 Select »Connection Type« with »
and then select »Wireless« with »
4 Select »Network Configuration« with »
5 Select »Select Access Point« with »
6 Select the network that you want to connect
7 Select the required character with »
dd.mm.yyyy
8 Start the registration to the home network by
hh:mm
OK
9 Press »
Wireless
N/A
AUTO
10.134.151.15
10.134.150.8
255.255.255.0
10 Press »mENu« to end the setting.
10.134.151.254
Connect
Test Connection
« or »
«
v
Λ
<
>
« or »
«.
»
« and then select »AUTO« with »
Λ
»
« and confirm with »oK«.
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
<
with »
«, »
«, »
« or »
v
Λ
»oK«.
– W ireless connection password screen is
displayed.
<
>
»
« and »
« and move to the next character
with »oK«.
– S elect »ABC« for uppercase and »abc«
for lower case and confirm with »oK«.
– S elect »?@123« for numbers and symbols
and confirm with »oK«.
– E nter the password, select »Confirm« with
<
»
«, »
«, »
« or »
v
Λ
»oK«.
Note:
In WEP encryption system, more than one
7
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
pressing »
« (red).
– T he mesage »Connecting ... Please Wait«
appears.
« (green) to make sure that the
network connection is established with the
current settings.
– T he messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
« or
v
<
>
« or »
«.
« or
v
>
« and confirm with
«, »
«,
v
Λ
>
« and confirm with
3 5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
