Grundig New­York ­55­ CLE ­9170 ­SL User Manual page 31

SmArt­INtEr@CtIvE­tv­AND­HomE­NEtworK
wired­network­settings
There are two ways of making the wired network
settings.
A Automatic wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B Manual wired network connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic­wired­network­­
connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1 Open the menu with »mENu«.
2 Select the line »CONNECTED APPS« with
» « or » « and press »oK« to confirm.
v Λ
– T he »CONNECTED APPS« menu appears.
CONNECTED APPS
inter@ctive Applications
Network Settings
Connection Type
Network Configuration
IP Address
DNS
Netmask
Gateway
MAC Address
Exit
Back
­ 3 2
ENGLISH
dd.mm.yyyy
hh:mm
OK
Wired
AUTO
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
Connect
Test Connection
3 Select »Connection Type« with »
and then select »Wired« with »
4 Select »Network Configuration« with »
» « and then select »AUTO« with »
Λ
5 Start the registration to the home network by
pressing » « (red).

– T he mesage »Connecting ... Please Wait«
appears.
6 Press » « (green) to make sure that the

network connection is established with the
current settings.
– T he messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success« and »Internet Connection:
Success«.
7 Press »mENu« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
­
« or » «
v Λ
< >
« or » «.
« or
v
< >
« or » «.