Detailed instruction manual EU directives You can find the detailed This product complies with the instructions at www. following EU directives: grundig.de under 1995/5/EC, 2004/108/EC, “Support”. 2006/95/EC, 2009/125/EC, 2010/30/ EU and 2011/65/EU. Table of Contents EU directives About your TV set...
About your TV set Safety WARNING With your TV set, you can receive and watch digital TV programmes over Risk of electrical accident DVB-S, DVB-T and DVB-C, along with Do not open the TV set. Safety risk may analogue TV. arise and also the guarantee of the You can connect various data media, for product can be void if the television set is...
Fire hazard NOTICE To prevent the spread of fire, Shortened service life due to high keep candles or other open operating temperature flames away from this product Do not place the TV set next to heating at all times. units or in direct sunlight. Do not cover the ventilation slots on the To ensure adequate ventilation, maintain TV set.
Page 4
Select a location for the TV set so that no direct sunlight falls on the screen. This allows a lower backlight to be selected, which saves energy. Do not dispose of the product along with normal household waste at the end of its service life.
Packing contents SERVICE User Manual Standart accessory Optional accessory 1. TV Easy-Use Remote Control Batteries for Easy-Use remote controls 2. Stand Cleaning cloth 3. Remote control Screws for VESA bracket 4. Batteries for remote controls 5. Screws and mounting instructions for stand 6.
Setting up or hanging Select a location so that no direct sunlight falls on the screen. Setting up with stand To mount the stand, refer to the installation instructions included. Place the TV set on a hard, level surface. Preparing for mounting on the VESA bracket You will need: A pair of scissors,...
Control elements AV / S-VHS / COMPONENT: SCART socket, audio/video input and output S-VHS socket, audio/video input for S-Video camera using a SCART-S-VHS adapter cable. Component socket, audio/video input (YUV signal) using a SCART-YPbPr adapter cable. SERVICE: Service only. Optic Out: optical audio output USB(HDD): for data media.
Inserting batteries into the Setting up the TV set remote control 1. Connect the cables. 1. Open the battery compartment. 2. Insert the power plug into the socket. 2. Insert batteries as marked on the 3. Switch on the power switch. bottom of the battery compartment 4.
Page 10
Remote control Turns on and off the television set (stand-by) Switches on from standby mode; selects channels directly Switches between teletext Selects the channel list and TV modes (»ALL«, »FAV 1« to »FAV 4«) HDMI CEC Device List Exits TV guide Displays information Zapping function;...
Favourites lists Media player You can organise TV and radio stations in The media player displays images and films favourites lists. and music. Films, music and images can be stored on a connected USB device. Saving a station to the Playing media favourites list 1.
CI: Slot for modules for receiving Direct current. The set encrypted TV channels. works only with AC/DC GSCR: Grundig Sat Channel Router. adapter. Technology that allows multiple TVs to be connected to a satellite antenna using a single-cable system.