Low Battery Indicator - La Crosse Technology Family Weather Station Instruction Manual

Table of Contents

Advertisement

To re-enable the buzzer:
1.
When the BUZZER OFF icon is shown on LCD, press the SET key shortly and
the BUZZER OFF icon will disappear.
2.
Press ALARM key once to return to the normal display mode. The "BUZZER
OFF" icon will no longer be shown. Then the alarm will sound normally.

LOW BATTERY INDICATOR

The low battery indicator of the weather station and the transmitter will be displayed at
the top and bottom portion of the LCD respectively when the battery power is low. It is
recommended to replace the batteries in all units on an annual basis to ensure
optimum accuracy of the system.
Note:
After battery change, both the Weather Station and the transmitters need to be
reset (see note "Setting up")
The History data record will be clear after the battery change.
OUTDOOR TRANSMITTER 868 MHz RECEPTION CHECK
The outdoor temperature, humidity, wind data and rainfall is transmitted from
transmitter every 4.5 seconds and the receiver will be synchronized to the transmitter
to receiver outdoor data then. The transmission range (supposedly up to about 100
metres) of the Outdoor Thermo-hygro transmitter may be affected by the ambient
temperature. At cold temperatures the transmitting distance may be decreased.
Please keep this in mind when placing the transmitter.
If the outdoor data are not being received within 30 seconds after setting up (or the
outdoor display show "- - -" in the outdoor section of the Weather Station after 32
44

Advertisement

Table of Contents
loading

Table of Contents