Discharge Mode - La Crosse Technology RS-900 Instruction Manual

Table of Contents

Enlarged version

For new rechargeable battery it is recommended to charge it with 200 mA current for re-

conditioning it from the long storage status.

DISCHARGE MODE

Discharge mode will first discharge the rechargeable battery then charge it. It is for removing the

memory effects of rechargeable batteries.

By pressing the MODE key within 8 seconds after inserting the rechargeable batteries, the

Discharge mode can be selected. (The mode key shall first be pressed and held for 1 second to

activate the mode change. The subsequent pressing of the mode key will enable to toggle

between the "Charge", "Discharge", "Test" and "Refresh" mode.)

Then user may also select different discharging current (see Table 2) by pressing the

CURRENT key, within 8 seconds after inserting the batteries. (The display will blink once to

indicate the setting has been confirmed and the current cannot be changed afterward.)

Table of Contents