La Crosse Technology Weather Station Instruction Manual page 7

minutes, the batteries will need to be removed from both units and reset from step 1.
5. Insert the batteries to the second transmitter as soon as the outdoor temperature readings from the
first transmitter are displayed on the Weather station.
Note: User shall insert the batteries into the second transmitter within 10 seconds of reception of the first
transmitter.
6. The outdoor data from the second transmitter and the "channel 2" icon should then be displayed on
the Weather station. If this does not happen after 2 minute, the batteries will need to be removed
from all the units and reset from step 1.
7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the Weather station. Then within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is
successfully received. If this is not happen, user shall restart the setting up from step 1.
Note:
•
User shall insert the batteries into the third transmitter within 10 seconds of reception of the second
transmitter.
8. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a
distance no more than 100 meters between the final position of the Weather station and the
transmitter (see notes on "Positioning" and "868 MHz Reception").
42