La Crosse Technology Weather Station Instruction Manual page 16

868 mhz

Hide thumbs Also See for Weather Station:

Table of Contents

Enlarged version

In case the Weather Station cannot detect the DCF-signal (for example due to disturbances, transmitting

distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

Hour Flashing

The hour digit will start flashing.

Use the OUT/+ key to set the hour.

Press again the SET key to set the minutes. The minute digits start flashing.

Use the OUT/+ key to set the minutes.

Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try and receive the signal every hour despite it being manually set. When it does receive

the signal, it will change the manually set time into the received time. During reception attempts the DCF

tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not appear but

reception will still be attempted the following hour.

Minute flashing

Table of Contents