Kyocera Mita KM-1620 Operation Manual page 83

3
Press the [OK] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
the initial layout value.
Inch specifications
5
Press the [OK] key.
The display will return to that of Step 2.
Inch specifications
Merge Copy Borderline
Set the initial value for the borderline for Merge Copies.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Section 6 COPIER MANAGEMENT
2
Press either the Zoom (+) or Zoom (–) key to display "F29".
Inch specifications
3
Press the [OK] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
"1-" when no borderline is to be applied, "2-" for when a
solid line is to be used or "3-" for when a dotted line is to be
used.
Inch specifications
5
Press the [OK] key.
The display will return to that of Step 2.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
6-27