Table of Contents
Advertisement
2
Product information
2.1
Use
The storage tank is designed to act as a buffer for the
heating system and is ideally suited to heat pump
applications.
Warning:
V Do not use the storage tank in conjunction
with permeable pipework.
2.2
Intended use
The storage tank must only be filled with heating water
and must only be used in sealed heating systems which
are designed for use with heat pumps. Any other use is an
infringement of use for intended purpose. Any damage
that may result is excluded from liability.
Not for use as a method of potable hot water
(Domesttic Hot Water) storage.
Scope of delivery
The packaged storage tank includes:
Drain valve (factory fitted).
The sensor pocket is for the installation of the
heat pump temperature sensor.
– Sensor pocket (for flow temperature sensor) and air
vent.
– Sensor pocket (for return temperature sensor GT1)
– bolts.
– Plastic cover cap.
4
Fig. 1
Primary water storage tank
1
bolts (x3)
2
insulation
3
storage tank
4
sensor pocket (for flow temperature sensor)
and air vent
5
cover cap
6
sensor pocket (for return temperature sensor GT1)
8 716 115 670 (02/2009)
Product information
Advertisement
Table of Contents
