How To Disassemble Each Component - LG FRIDGE User Manual

Indoor lamp
w w Caution
Note
16
How to disassemble each
component
It can be possible to disassemble only when the door is
opened by 90° or wider. Disassembling should be done by
the reverse order of assembling.
Disconnect the power plug or turn off the main power
before disassembling.
-
Insert the fingers into the
inside slot of the top cover
and pull out it to remove.
-
Push the upper part of the
middle cover and pull out
it to remove.
-
Turn counterclockwise the
indoor lamp to
disassemble.
-
Use the 240V 30W bulb for the refrigerator as indoor
lamp.
-
Because the indoor lamp is consumable, when the
indoor lamp is not turned on, purchase it from the LG
Electronics Service Center and directly replace it to use.
• You must check the O-RING, which is made by rubber
and prevent electric spark.
• Don't touch the lamp, in case of light on the long
time. Because it can be very hot.
• Lamp capacity is MAX 30W.
• The lamp will remain "ON" for 7minutes if the door
is left open and then it is "OFF" for safety. (If you
reopen the door, the lamp is "On".)
1
2