Selecting The Operation Mode - LG DP570T Owner's Manual

General about digital broadcast
Picture and sound
Digital TV is a transmission technology that replaces the traditional analogue
technique.
This means that several TV channels, radio channels and other digital services
can be transmitted on the same space as just one channel took up before.
As a consumer you get access to many more channels and services than before
at the same time as they are received with perfect picture and audio quality.
Coverage
Before buying this product it is anticipated that you have made sure that there
are digital transmissions covering your region.
Antenna / Signal source
Depending on the reception your unit may be connected to a simple indoor
antenna or to an existing outdoor antenna system. If you live in a flat you should
make sure that the digital terrestrial signals are distributed to your wall antenna
outlet. If you have your own antenna system you must make sure that it is
equipped with antennas, filter and/or amplifier that can handle those frequencies
that the digital channels are transmitted on.
Cable-TV
Please observe that this unit is not designed for the reception of regular digital
cable-TV signals (QAM-signal). Despite this, operators of smaller cable net-
works may have chosen to distribute the digital terrestrial signals (COFDM-sig-
nal) in the network. In this case this unit may well be used.
Check with your landlord if you are insecure about what type of TV-signal that is
provided in the wall antenna outlet.
10

Selecting the operation mode

You must select one of the operating modes before operating.
Press MODE repeatedly to change the mode among DVB-T, DAB or Disc.
• Disc: You should select the Disc mode before using playback functions or
disc setup setting.
• DVB-T: You should select the DVB-T mode before watching TV channel or
using TV setup setting.
• DAB: You should select the DAB mode before listening to the radio or using
radio setup setting.