Clarion NX409 Owner's Manual & Installation Manual page 19

1. Check button
2.
Enter button
3. Return to previous screen (menu)
4. The navigation system will calculate a route to
the selected destination by using the criteria
set in Setup Mode.
5. Touch the State or Province button.
The "City" keyboard screen will be displayed.
Press the "Check" (1) button to choose the city
from the list, or spell the City name on
keyboard. Than press Enter (2) button.
((j))
~t~~
-d·,.-,\TfP I'A
3. Select one of the options dispalyed on the
screen.
• GoTo...
• Point of Interest
• State or Province: CA (The software
remembers the last State/Province)
• History (The adresses you navigate before)
2. Press the highlighted check mark (Accept).
The Main Menu will be displayed. Select your
destination.
1. Touch the [Navi] button on the Main Menu
screen.
The warning screen will be displayed.
1. Touch the [Radio Field] button in the Setup
menu.
2. A region selection menu will appear. Scroll
down using the arrow at the bottom of the
menu. Scroll up using the arrow at the
bottom of the menu. Select the area's radio
region that you are in. If the region selected is
incorrect, radio reception will be poor.
Displaying the Navigation Map
Basic Op_e_ra_t_io_n_s _
Adjusting the clock
2. Set up the time by touching the digital
numbers on the screen.
3. Touch the [Clock Mode] to change time
settings to 12Hr or 24Hr. Select 12AM or PM
mode.
Adjusting the Radio region
Press the [Setup] button. The Setup menu will
be displayed. Touch "Clock" in General sub
menu.
NX409/NZ409
19