Canon DR-4010C User Manual page 118

Chapter 7 ISIS/TWAIN Driver Settings
With the [Standard Feeding] Feeding Option
With the [Automatic Feeding] or [Panel Feeding] Feeding Option
[Auto]
Each batch of documents is saved with different file names.
[Panel]
Document batches are separated when the [Batch Separation] button on the Scan Panel is pressed.
(See "Scan Panel," on p. 3-21.)
[Patchcode]
Batches are separated whenever a patchcode sheet is detected between documents.
Using Patchcode Sheets," on p. 3-23.)
☞ When [Patchcode] is selected, the [Folio] Scanning Side setting on the [Basic] tab sheet is not
available.
Patchcode Orientation (ISIS driver only)
When [Patchcode] batch separation is enabled, you can select patchcode orientation here.
☞ Settings for various patchcode types and orientations on document pages are as follows.
Patch T
FILE A
Patch II
FILE B
Patchcode orientation
[Prescan] Check Box
When this check box is selected, the first document page is prescanned and displayed in the
Prescan panel when scanning is first started. Continue scanning after you confirm or adjust
brightness and contrast of the scanned image in the Prescan window.
0° 90°
7-22
(See "3-6
180° 270°
(See "Prescan," on p. 9-7.)