Chapter 2 Hardware Installation; Before You Begin; Basic Requirements; Connecting The Device - TP-Link TL-WA890EA User Manual

TL-WA890EA

Chapter 2 Hardware Installation

2.1 Before You Begin

A good knowledge of the LEDs and its indication will facilitate your quick installation of the

Entertainment Adapter.
Keep the Entertainment Adapter away from any devices that might cause wireless

interference, such as cordless phones, blue tooth devices, microwave ovens, etc.
Do not place the Entertainment Adapter too far away from the main router/AP, especially

when you are trying to connect them by pressing their WPS button.

2.2 Basic Requirements

Place your Entertainment Adapter in a well-ventilated place far from direct sunlight, any

heater or heating vent.
Leave at least 2 inches (5cm) space around the device for heat dissipation.

Turn off your Entertainment Adapter and unplug the power adapter in a lighting storm to avoid

damage.
Use Web browser, such as Microsoft Internet Explorer 5.0 or above, Netscape Navigator 6.0

or above.
Operating temperature of the Entertainment Adapter should be 0℃~40℃ (32℉~104℉).

Operating humidity of the Entertainment Adapter should be 10%~90%RH (Non-condensing).


2.3 Connecting the Device

Please follow the steps below to connect the devices:
1) Connect one end of the USB cable to the USB port of TL-WA890EA, and the other end to the
power adapter; then plug the power adapter to a standard wall socket.
N600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports
Figure 2-1 Typical connection of TL-WA890EA
4