Hamilton Beach 840118100 User Manual page 9

Continuous Processing
Please see the Easy to Use
Assembly Guide on page 5.)
Continuous processing allows food to
be processed in a separate bowl when
processing large quantities.
IMPORTANT: For continuous process-
ing, insert food gate into slot of lid and
make sure the continuous feed disc is
in place.
1. Make sure the Control Switch is turned
to OFF and the unit is unplugged.
2. Lock the bowl onto base. (See "How
to Lock the Bowl" on page 6.)
3. Put disc shaft onto motor shaft.
4. Place the continuous feed disc,
ribbed side up, onto the disc shaft.
Turn the disc slowly until it drops into
position (level with top of bowl).
Continuous
Feed Disc
5. Select desired side of reversible
slicing/shredding disc and place that
side up on the disc shaft.
Slicer/Shredder
Disc
6. INSERT FOOD GATE WITH SHORT
SIDE DOWN INTO SLOT OF LID.
7. Lock on cover. (See "How to Lock
the Cover" on page 7.) Place bowl
under feed chute.
8. Plug in unit and select speed.
Process food. Check the continuous
feed chute frequently to make sure
the opening is not blocked. If
blocked, turn unit off and unplug.
Clear blockage, then reassemble
and continue processing.
NOTE: When using the continuous feed
Motor
chute, some food may fall into the food
Shaft
processor bowl.
Do not use the continuous feed chute
feature to slice meats or cheeses or
when shredding root vegetables
(carrots, potatoes, etc.). As with most
continuous feed processors, shredded
moist vegetables may clog in the chute.
Motor
It is best to shred these vegetables into
Shaft
the food processor bowl. Slicing these
root vegetables while using the continu-
ous feed chute will not present a problem.
(available on
selected models)
Hint!
9