Troubleshooting; Specifications - Soundstream H-300BAR Instruction Manual

Troubleshooting

To keep the warranty valid, never try to
repair the system yourself. If you encounter
problems when using this unit, check the
following points before requesting service.
No power
- Ensure that the AC cord of the apparatus
is connected properly.
- Ensure that there is power at the AC
outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button,
first select the correct source.
- Reduce the distance between the
remote control and the unit.
- Insert the battery with its polarities (+/-)
aligned as indicated.
- Replace the battery.
- Aim the remote control directly at the
ensor on the front of the unit.
No Response From the Unit
- Disconnect and reconnect the AC
power plug, then turn on the unit again.
No audio output from subwoofer
- Set wireless connection manually

Specifications

General
Power Requirements ..........AC 120V ~ 60Hz
Power Consumption ..............................15W
Output Power ...........................25W×2+50W
Total Harmonic Distortion ...... 1%(1kHz, 1W)
Audio Input Sensitivity/Impedance: ..........
................................................... 500mV/47kΩ
Frequency Response .... 40Hz - 20kHz(±3dB)
Unit Dimensions (W x H x D)
Main Unit ........................800 x 73.5 x 64 mm
Subwoofer ....................... 433 × 94 × 240mm
Speaker
Front
Impedance .............................................. 3 Ω
Rate Power .............................................25W
Woofer
Impedance .............................................. 6 Ω
Rate Power .............................................50W
Remote
Distance ....................................................6m
Angle ........................................................ 30
7
O