Table of Contents
Advertisement
Basic Operations
Turn On/Off
When you connect the TV or an external
device to the unit, the unit will turn on
automatically. The Auto Power indicator
l i g h t i s b l u e . I t w i l l t u r n r e d w h e n
disconnected or when you turn off TV /
external device.
NOTE:
If the volume of the TV or an external
device is too low, the unit will turn off
automatically.
Function selections
While the Optical, MP3 link, Aux in
socket are connected to external audio
device. Press
Optical, MP3 link or Aux in function.
Adjust Volume Level
D u r i n g p l a y , p r e s s t h e V O L U M E + / -
b u t t o n s t o i n c r e a s e / d e c r e a s e t h e
volume level.
Super Bass Boost
Press the RS-BASS button to turn on the
bass, the indicator flashes for a longer
time (abouts 1s-2s). Press this button
again to turn off the bass, the indicator
flashes for a shorter time (about 0.5s-1s).
Mute Sound
During play, press the MUTE button to
mute or restore sound. Press this button
again or VOL+/VOL - buttos to cancel
the effect.
source
to select
Program Smart Remote Control to
Control TV
Y o u c a n s t o r e a t o t a l o f 7 m o s t
frequently used function of you TV in
the TV (learning zone) of smart remote
control. This feature allows you to use
only one remote control to operate all
of your TV.
By default, the remote control codes
of a TV are stored in the smart remote
control. The available preset buttons are
ON/OFF, FUNCTION, ENTER, TV VOL+/
VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal
remote control functions are disabled.
1 Place the smart remote control (A)
within 5mm-50mm distance from TV
remote control (B).
2 Press and hold LEARN button for 2
seconds to activate the learning mode.
A red indicator on the smart remote
control (A) lights up.
3 Press one of the TV (learning zone)
buttons on the smart remote control(A),
the red indicator flashes.
4 Press the button on TV remote control
(B) that is to be stored on the smart
remote control (A). When the code is
received successfully, the red indicator
flashes 3 times, then turns red again. If
the red indicator flashes but not turn red,
code received is not successfully.
5 Repeat steps 3-4 to program more
buttons on the smart remote control (A).
6 Press LEARN to save the learning and
then to exit the learning mode.
6
Advertisement
Table of Contents
