Program Smart Remote Control To Control Tv; Troubleshooting - Soundstream H-305BAR Instruction Manual

Program Smart Remote Control to
Control TV
Y o u c a n s t o r e a t o t a l o f 7 m o s t
frequently used function of you TV in
the TV (learning zone) of smart remote
control. This feature allows you to use
only one remote control to operate all
of your TV.
By default, the remote control codes
of a TV are stored in the smart remote
control. The available preset buttons are
ON/OFF, FUNCTION, ENTER, TV VOL+/
VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal
remote control functions are disabled.
1 Place the smart remote control (A)
within 5mm-50mm distance from TV
remote control (B).
2 Press and hold LEARN button for 2
seconds to activate the learning mode.
A red indicator on the smart remote
control (A) lights up.
3 Press one of the TV (learning zone)
buttons on the smart remote control(A),
the red indicator flashes.
4 Press the button on TV remote control
(B) that is to be stored on the smart
remote control (A). When the code is
received successfully, the red indicator
flashes 3 times, then turns red again. If
the red indicator flashes but not turn red,
code received is not successfully.
5 Repeat steps 3-4 to program more
buttons on the smart remote control (A).
6 Press LEARN to save the learning and
then to exit the learning mode.

Troubleshooting

To keep the warranty valid, never try to
repair the system yourself. If you encounter
problems when using this unit, check the
following points before requesting service.
No power
- Ensure that the AC cord of the apparatus
is connected properly.
- Ensure that there is power at the AC
outlet.
- Press standby button to turn the unit on.
Remote control does not work
- Before you press any function button,
first select the correct source.
- Reduce the distance between the
remote control and the unit.
- Insert the battery with its polarities (+/-)
aligned as indicated.
- Replace the battery.
- Aim the remote control directly at the
ensor on the front of the unit.
No Response From the Unit
- Disconnect and reconnect the AC
power plug, then turn on the unit again.
No audio output from subwoofer
- Set wireless connection manually
7