Kenmore 79048902000 Installation Instruction page 5

Oven
door
Remove all packaging inside the ovens and remove the
lower oven racks and their supports (see owner's guide
for further instructions).
O ind the 2 mounting screws included in the literature
package.
Insert the unit into the cabinet opening. Slide unit inward
leaving 11/t'' (3.8 cm) clearance between the unit and
front of cabinet (see Figure 5).
Install the bottom trim the with now
using supplied screws
the unit (Figure 6).
Screws
supplied
Figure 6
Install now the center trim using the screws supplied with
the unit, on both sides (Figure 7).
Figure 5
I
0
Figure 7
O Pull the armored cable the hole for it in the
through
cabinet and toward the junction box while moving the
appliance inward.
5