Setting Up And Charging Your Motorcycle; Getting Ready; Let's Roll - Brookstone u•Control Instruction Manual

seTTInG UP & chaRGInG YoUR MoToRcYcle
1. Insert the MOTORCYCLE ANTENNA wire into the MOTORCYCLE ANTENNA
PROTECTIVE COVER—then push the end of the MOTORCYCLE ANTENNA
PROTECTIVE COVER into the antenna port securely.
2. Make sure the ON/OFF SWITCH on the motorcycle is set to the OFF position.
3. Connect the AC ADAPTER plug to the CHARGING PORT on the motorcycle
and the AC ADAPTER to an electrical outlet. The approximate time for a
completely depleted rechargeable battery to charge is 5 hours.
4. When charging is complete, unplug the AC ADAPTER from the CHARGING
PORT and store the AC ADAPTER in a safe place.

GeTTInG ReadY

1. Make sure the FORWARD/STOP LEVER on the REMOTE CONTROL is
pushed to the STOP position. Move the motorcycle's ON/OFF SWITCH to ON.
2. Place and hold the motorcycle on the ground, pointed away from you, spectators,
pets and hard objects or breakable items.

leT's Roll!

1. Move the FORWARD/STOP LEVER on the REMOTE CONTROL to the
forward position.
2. Launch motorcycle.
3. Move the RIGHT/LEFT LEVER right and left to steer the motorcycle.
Note: The faster the speed, the wider your turns will be.
9