Controlling The Fridge Temperature - Samsung RF31FMED User Manual

will move sequentially from -8°F to 5°F (or from
-23°C to -15°C).

Controlling the fridge temperature

RF31FMES**(For sparkling water model only) RF31FMES**(For sparkling water model only)
Recommend Temp (Fridge) : 37°F (or 3°C ) Recommend Temp (Fridge) : 37°F (or 3°C )
RF31FMED**(For Ice/Water model Only ) RF31FMED**(For Ice/Water model Only )
Recommend Temp (Fridge) : 37°F (or 3°C ) Recommend Temp (Fridge) : 37°F (or 3°C )
The fridge temperature can be set between
34°F and 44°F (or between 1°C and 7°C) to suit
your particular needs. Press the Fridge button
repeatedly until the desired temperature is shown
in the temperature display. The temperature will
change by 1°F (or 1°C) with each press. See
below.
Fahrenheit : 37°F ➞ 36°F ➞ 35°F ➞ 34°F ➞ 44°F
➞ 43°F ➞ 42°F ➞ 41°F ➞ 40°F ➞ 39°F ➞ 38°F
➞ 37°F.
Centigrade : 3°C ➞ 2°C ➞ 1°C ➞ 7°C ➞ 6°C ➞
5°C ➞ 4°C ➞ 3°C.
The temperature control process for the Fridge
works just like the Freezer process. Press the
Fridge button to set your desired temperature.
After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This
will be reflected in the digital display.
- The temperature of the Freezer or Fridge
may rise when you open the doors too
frequently, or if a large amount of warm
or hot food is placed inside.
- A rise in temperature may cause the digital
display to blink. Once the Freezer and
Fridge temperature return to their normal set
temperatures, the blinking will stop.
- If the blinking continues, you may need to
28_ operating
DA68-02894A-09.indb 28 DA68-02894A-09.indb 28
"reset" the Refrigerator. Try unplugging the
appliance, wait for around 10 minutes and
then plug the power cord back in.
- If there is a communication error between the
Display and Main Controller, the Convertible
Display light may blink. If the blinking continues
for a long period of time, please contact a
Samsung Electronics Service Center.
2013. 12. 3. 2013. 12. 3. 8:45 8:45