Medialink MWN-USB54G User Manual page 9

3. The Install Shield Wizard screen will appear (Figure 2-2). Click "Next" to continue.
4. After the files have been successfully copied, the screen in Figure 2-3 will appear. Click the
Finish button to finish the wizard.
5. HARDWARE INSTALLATION- Connect one end of the USB cable to the Adapter.
6. Connect the other end of the USB cable to the USB port on your computer. Because the
Adapter gets its power from the host, there is no external power supply. The LED should light
up when the Adapter is plugged in and the PC is on.
MWN-USB54G 54M Wireless USB Adapter User Guide
Figure 2-2
Figure 2‐3
- 3 -