Chapter 3 Configuration; Configuration Of Utility; Profile - Medialink MWN-USB54G User Manual

3.1 Configuration of Utility

MEDIALINK MWN-USB54G Wireless USB Adapter can be configured by its utility for Windows
98SE, ME, 2000, XP. This section describes how to configure your Wireless USB Adapter for
wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security
encryption features.
After the Adapter's driver and utility has been installed, the adapter's tray icon,
appear in your system tray. It means the utility is running on your system. If the utility does not run,
you can run the utility by clicking: Start> Program> MEDIALINK> MWN-USB54G WIRELESS
UTILITY> MWN-USB54G Wireless Utility. If the icon still does not appear, the driver or utility
may be installed incorrectly or the adapter is unplugged, please try again.
Icon means the connection has been established. Icon
Double-click the icon and the configuration screen of the utility will appear. You can also run
the utility by clicking: Start> Program> MEDIALINK> MWN-USB54G WIRELESS UTILITY>
MWN-USB54G Wireless Utility. The utility provides a complete and easy to use set of tools to:
Display current status information

Edit and add configured profiles

Display current diagnostics information

The section below introduces these above capabilities.

Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings.
(To use this function, you must upgrade the OS with sp1).
If you want to use Windows XP to configure wireless network settings, just exit the utility.
Right-click the icon

3.1.1 Profile

Click the Profile tab of the utility and the Profile screen will appear, Figure 3-1. The Profile
screen provides tools to:
Add a Profile

Delete a profile

Edit a profile

Activate a profile

MWN-USB54G

Chapter 3 Configuration

at the bottom of the screen, and click Exit to exit the utility.
- 10 -
54M Wireless USB Adapter User Guide
means there is no connection.
or , will