2.1.3 Installation for Windows Vista
After you complete the hardware installation, follow the steps below in order to install the
MWN-USB54G Wireless USB Adapter drivers for Windows Vista:
1.
HARDWARE INSTALLATION- Connect one end of the USB cable to the Adapter.
2.
Connect the other end of the USB cable to the USB port on your computer. Because the
Adapter gets its power from the host, there is no external power supply. The LED should light
up when the Adapter is plugged in and the PC is on.
3.
Insert the Resource CD into your CD-ROM drive, right-click the Computer icon as shown in
the 2-4, select the Properties.
MWN-USB54G
Figure 2-4 Begin installation for Windows Vista
- 4 -
54M Wireless USB Adapter User Guide