Using The Microsoft Zero Config Utility To Establish A Connection To The Wifi Network - Hercules UMPC EC-900CW-H160G User Manual

For more information about the connection status:
The eCAFÉ™ Connect icon appears in the notification area. It provides updated information about the
connection's status:
Internet connection: an Ethernet or WiFi
peripheral is active and physically
connected; Internet access is available.
Local area connection: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
Connection problem: an Ethernet or
WiFi peripheral is active and physically
connected; no Internet access is
available.
No connection: an Ethernet or WiFi
device is active but is not connected
physically.
No peripheral: no Ethernet and/or WiFi
peripheral have been activated.
If your computer uses the Microsoft Zero Config utility to establish a connection to the WiFi
network:
3.6.2. Using the Microsoft Zero Config utility to establish a
1. In the windows system tray, click the
2. In the list of available networks that appears, click the desired network, then click the Connect
button.
24/40 – User Manual
UMPC EC-900CW-H160G/V
connection to the WiFi network
Your Internet connection is perfectly operational.
You are connected to a modem, a router or an
Internet box or to a corporate network; however, this
device or network is not connected to the Internet.
Please check the Internet connection settings on
your local area network or your modem.
Please check your network connection settings (IP
address, subnet mask etc.) on your local area
network or your modem. If necessary, contact your
router's or modem/router's vendor.
Connect your eCAFÉ™ to a local area network via
the WiFi connection (please refer to the previous
section) or via the Ethernet port.
Activate your peripheral: to activate your WiFi
peripheral, simultaneously press on keys [Fn] and
[F1] on your ultra-mobile personal computer's
.
keyboard
Wireless Network Connection icon.