Agilent Technologies 81101A Reference Manual page 98

Clock / PLL Reference Input
Input Specifications
Input impedance:
Threshold:
Maximum input voltage:
Input transitions:
Input Frequency:
Minimum pulse width:
Input sensitivity:
Delay from Clock Input to TRIGGER OUT/
STROBE OUT:
Rear panel BNC connector used as:
• External system clock input: pulse frequency = input frequency.
The input frequency can be measured.
• 5 MHz or 10 MHz frequency reference input for internal PLL.
Phase Locked Loop (PLL)
• Locks either to an external frequency reference at the PLL Ref Input
Clk In (5 MHz or 10 MHz selectable) or to its internal reference.
• High accuracy period (frequency) source.
When locked to the internal reference, period accuracy, resolution,
and jitter are improved.
When locked to an external frequency reference, the external
frequency affects these accuracies.
• Internal triggering of bursts: the internal PLL can replace an external
trigger source, while the output period is determined by the startable
oscillator.
98
Agilent 81101A
50 or 10k selectable
–10 V to +10 V
+15 V
<100 ns
dc to max 50 MHz
10 ns
< 300 mVpp typical
12 ns typical