Table of Contents
Advertisement
:ARM:SOUR
:ARM[:SEQuence[1]|STARt][:LAYer]:SOURce
Set & Query
IMMediate|INTernal[1]|INTernal2|EXTernal[1]|MANual
IMM
Use this command to select the triggering mode of the instrument by
selecting the source of the arming signal:
Triggering Source :ARM:SOURce
Internal Osc.
IMMediate|INTernal[1]
PLL
INTernal2
EXT INPUT
EXTernal1
MAN key
MANual
Use :ARM:SENSe EDGE | LEVel to choose between Triggered and
Gated.
:DISP
:DISPlay[:WINDow][:STATe]
Set & Query
ON | OFF | 1 | 0
ON
Use this command to turn the front panel display on and off. Switching
off the display improves the programming speed of the instrument.
*RST switches the display back on. Use :SYSTem:PRESet to perform an
*RST without switching the display back on.
To switch off the front panel display:
DISP OFF
Mode
Continuous
Triggered | Gated by PLL
Triggered | Gated by EXT IN
Triggered | Gated by MANKey
43
Hide quick links:
Advertisement
Table of Contents
