Advertisement
Connect
power
supply cord
or power
supply cable
Install anti-
tip bracket
_
ecure range
with anti-tip
bracket
Check that oven
heats properly
Q
emove shipping
material.
Remove oven
racks and parts
package.
D
heckthat
€ooktop
elements heat
_
Level range
_
Loosen
levelinglegs
Replace storage
drawer or panel
Operating position
0
Move the range into final operating
= position. Remove cardboard or
hardboard from under range.
1
ReJ
,'storage drawer or lower
-
panel and checkthat rear leg is
engaged in anti-tip bracket.
2
If installingthe range in a mobile
• home, you MUST secure the range to
the floor. Any method of securing the range is
adequate as long as it conforms to the standards in
the "Mobile home installationinstructions,"
Page 1.
13.
Place rack in oven. Place level on rack,
first side to side; then front to back.
If range is not level, pull range forward until rear
leveling leg is removed from the anti-tip bracket,
Remove covers from front leveling legs. Insertthe
square drive of a 3/8" socket wrench into the top
of leveling legs or use a 10" adjustable wrench to
adjust leveling legs up or down until range is
level, Reinstall covers on front leveling legs,
Push range backinto position. Check that the rear
leveling leg is engaged in the anti-tip bracket,
Note: Oven must be level for satisfactory baking
conditions,
4
Replace the storage drawer or lower
II
panel.
Page 4
Advertisement
