If Range Does Not Operate; If You Need Assistance; If You Need Service; Moving The Range - Whirlpool GS475LEMS1 Installation Instructions Manual

If range does not
operate:
[_ Check that the circuit breaker is not
tripped or the house fuse blown.
[_ Check that the power supply cord is
plugged into the outlet.
[_ Check that gas line is turned on.
[_ See Use and Care Guide for
troubleshooting list,
If you need assistance:
if you have questions about operating,
cleaning or maintaining your range:
[_ Refer to Use and Care Guide.
[_ Caii the Customer interaction Center.
Check your Use and Care Guide for a
toll-free number to call or call the
dealer from whom you purchased
this appliance, The dealer is listed in
theYellow Pages of your phone
directory under "Appliances-
Household -- Major -- Service and
Repair"
If you need service:
Maintain the quality built into your range
by calling an authorized service
compan%
To obtain the name and number of the
authorized service company:
[_ Contact the dealer from whom you
purchased your range; or
[_ Look in theYellow Pages of your
telephone directory under
"Appliances -- Household -- Major
-- Service and Repair;" or
[_ Call the Customer Interaction Center.
The toll-free number is listed in your
Use and Care Guide.
When you call, you wiii need:
[_ The range model number.
[_ The range serial number.
Both numbers are listed on the
model/serial rating plate located on the
oven frame behind the storage drawer.
Moving the range
Tip Over Hazard
A child or adult can tip the range and
be kH[ed.
Connect anti-tip bracket to rear
range foot.
Reconnect the anti-tip bracket, if the
range is moved.
Failure to follow these instructions can
result in death or serious burns to
children and adults.
When moving range, slide range onto
cardboard or hardboard to prevent
damaging the floor covering,
If removing the range is necessary for
cleaning or maintenance:
1. Remove the storage drawer.
2. Shut off gas supply to the range.
3. Disconnect gas.
4. Unplug range or disconnect power.
5. Slide range forward to complete
cleaning or maintenance.
6_
Make sure the anti-tip bracket is
installed:
• Look for the anti-tip bracket securely
attached to floor.
• Slide range back so rear range foot
is under anti4ip bracket.
7. Check that range is level.
8. Reconnect gas line to range and
check for leaks.
9. Plug in range or reconnect power.
10. Reinstall storage drawer.
Part No. 9758663 Printed in U.S.A
@ 2004Whirlpool Corporation Benton Harbor, Michigan 49022 2/2004