Haier HWM55-10 User Manual page 14

Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing
Selected procedure
the"PROCEDURE
selection
SELECTIONbutto n "
Wash, rinse, spin
0
Wash(the washing liquid
1
remains in the tub)
Wash,rinse(the rinsing liquid
2
remains in the tub)
3
Rinse,spin
4 Spin(spin after drain)
Soak,wash,rinse,spin
5
If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the
original mode, and it will circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic
programs.Soak with slight stirring before wash.
4.Push the WATER LEVEL button to
select suitable water level
When the power is switched on, the washing machine will check the cloth automatically.
After that, the water level is set automatically. T o select other water level, push the
button. Refer to the Standard usage quantity of the detergent and water quantity and
WATER LEVEL SELECTION in Page 9 for the selection.
laundries
.
Applicable procedure
When the common laundries need
washing,rinsing and spinning.
Repeat using the washing liquid
Repeat using the washing liquid
When the laundries need rinsing
and spinning after manual washing
When the laundries need only
spinning after manual washing
(first drain the spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty,first soak then wash
12
the nixie tube
Contents(
the programs about to run)
Soak Wash Rinse
Wash
Soak Rinse
Wash
Soak Rinse
Wash
Soak Rinse
Wash
Soak Rinse
Wash
Soak Rinse
WATER LEVEL SELECTION
Page 9
indicates
Spin
Spin
Spin
Spin
Spin
Spin