JVC Exad KD-AVX20 Instructions Manual page 43

Menu items
Beep
Telephone Muting*
Illumination
Initialize
* 1
Selectable only for "Disc" and "USB." (Playback stops when you select one of the items.)
* 2
Not selectable when "AV Input" is selected as the source.
The REVERSE GEAR SIGNAL lead connection is required ☞ "Installation/Connection Manual." The rear view through
3
*
the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
* 4
Not selectable when the component connected to the CD changer jack is selected as the source.
* 5
The name of the component detected through the CD changer jack is shown.
The TEL MUTING lead connection is required. ☞ "Installation/Connection Manual."
* 6
Selectable settings, [reference page]
Off: Cancels.
On: Activates the key-touch tone.
6
Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the cellular phone.
You can turn off the touch pad controls and monitor lights while turning
on the unit. ☞ [5]
Normal:
Proximity/Motion: Lights up when your hand
Proxi/Motion-LCD: Light up when your hand moves close to the
Touch Pad:
Touch Pad-LCD:
Initialize all settings you have made in
reset the unit. ☞ [3]
Touch pad controls
Always lights.
moves close to the controls.
controls.
Lights up when your finger
touches the controls.
Light up when your finger touches the controls.
<AV
43
Monitor
Always lights.
Always lights.
Menu>. Hold 6, then
SETTINGS