Additional Wireless Settings - TRENDnet TEW-812DRU User Manual

TRENDnet User's Guide
To configure WDS bridging between TEW-812DRU routers:
1. Log into your router management page (see
on page 16).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WDS.
4. Next to Wireless Distribution System (WDS), in an empty field, enter the MAC
address of the other WDS supported wireless device you are bridging. (e.g.
00:11:22:AA:BB:CC). To save settings, click Apply.
For additional routers, make sure to disable the DHCP server first on all additional
routers and configure the LAN IP address to be different on each router. You will
connect devices to the LAN ports 1-4 only on all additional routers and the WAN port is
not used. Then, repeat the steps for additional routers you are bridging.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your router management page"

Additional wireless settings

Advanced > Wireless (2.4GHz or 5GHz) > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
To configure multiple SSID on your router:
1. Log into your router management page (see
on page 16).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on Multiple SSID.
4. Review the Multiple SSID settings, click Apply when finished.
TEW-812DRU
"Access your router management page"
32