Daily Operations-Playback - JVC UX-GP7V Instructions Manual

In this manual, operations using the remote control
are mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
Remote control
Number
buttons
Daily Operations—
Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
• Instead of pressing
turned on by pressing one of the source buttons.
2
Select the source.
• Playback automatically starts if the selected source
is ready.
• You can change the display information by pressing
DISPLAY. For details, see page 18.
3
Adjust the volume.
To turn off (standby) the System
The STANDBY lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack
on the main unit. The sound will no longer come out
of the speakers. "H-PHONE" appears on the display
for a while. Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System
with the volume set at an extremely high
level; otherwise, the sudden blast of sound
may damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
AUDIO/TV, the System is
8