Program - Zenith SLV1940S Operating Manual & Warranty

* Youcanonlywatchthesame TVprogram that
isbeing
recorded.
Insert a cassette with erase-prevention tab intact.
The unit turns on automatically.
imm
Ensure TIMER REC indicator is off. When TIMER
REC indicator lights on, press POWER button to
turn on.
POWER
CB
TIMER REC
O
Press SPEED button on the remote control repeat-
edly until the desired recording speed is dis-
played. (Example : SP)
SPEED
8P
n
Select the program to be recorded by pressing the
number button or the CH./SET "A" or "V" button.
CH 321
Press REC button.
The RECORD indicator lights up.
REC
To skip some material while you are recording;
Press PAUSE/STILL button on the remote control.
F.ADV
PAUSE/STILL
Note: If the TV/VCR is left in the Pause/Still
mode more than 5 minutes in the Recording mode,
It will automatically switch to the Reo3rding
mode. When in the Pause/Still mode, a display
showing 5 'l" marks _hri';,l a ppear on the screen.
Each 'l" mark repres(:nl:s one minute of Pause
time. You may refer to this display for remaining
pause time available.
Press PAUSE/STILL bu,tton or REC button on the
remote control to resume recording.
_.ADV
PAUSFJSTILL
REC
Press STOP button when recording is completed.
STOP
- 20 -