HP ProLiant ML350 Quickspecs page 34

QuickSpecs
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". NOTE NOTE NOTE
HP ProLiant ML350 G5 Memory Configuration HP ProLiant ML350 G5 Memory Configuration HP ProLiant ML350 G5 Memory Configuration HP ProLiant ML350 G5 Memory Configuration
The HP ProLiant ML350 G5 requires memory interleaving when more than one DIMM is installed. For interleaving, DIMMs must be
configured in identical pairs. The system will not boot properly if multiple DIMMs of varying density or type are installed in the
system.
Standard Memory Standard Memory Standard Memory Standard Memory
All HP ProLiant ML350 G5 models ship with PC2-5300 Fully Buffered DIMMs (DDR2-667).
Entry models include a single 512 MB DIMM (Dual-Core) or two 512MB DIMMs (Quad-Core).
Base models include two 512 MB DIMMs (1GB total memory).
Factory Integrated Models include the memory capacity of your choice.
Common Memory Configuration Common Memory Configuration Common Memory Configuration Common Memory Configuration
Valid DIMM pair combinations use slots 1/5, slots 2/6, slots 3/7, and slots 4/8. Maximum supported memory is 16 GB for Dual-
Core and 32 GB on Quad-Core models.
NOTE: NOTE: NOTE: Charts does not represent all possible memory configurations. NOTE:
Memory Memory Memory Memory
Standard Standard Standard Standard 1 GB 1 GB 1 GB 1 GB
Optional Optional Optional Optional 13 GB 13 GB 13 GB 13 GB
Maximum Maximum Maximum Maximum 32 GB 32 GB 32 GB 32 GB
Following are memory options available from HP:
512MB FBD PC2-5300 1 x 512 MB Kit
1 GB FBD PC2-5300 2 x 512 MB Kit
2 GB FBD PC2-5300 2 x 1 GB Kit
4 GB FBD PC2-5300 2 x 2 GB Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
Online spare memory configuration Online spare memory configuration Online spare memory configuration Online spare memory configuration
FBDIMMs can either be single-rank or dual-rank. Certain FBDIMM configuration requirements are based on these classifications. A
dual-rank FBDIMM is similar to having two separate FBDIMMs, or ranks, on the same module. Although only a single FBDIMM
module, a dual-rank FBDIMM acts as two separate FBDIMMs.
In online spare mode, a single rank of memory acts as the spare memory. For single-rank FBDIMMs, the entire FBDIMM acts as the
spare memory. For a dual-rank FBDIMM, only half of the FBDIMM acts as the spare memory while the other half is available for
operating system and application usage.
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
For optimum memory usage, HP recommends all FBDIMMs be the same size with the same HP part number. If different sized
FBDIMMs are used, a portion of the installed memory may not be utilized.
In online spare mode, FBDIMMs must be populated as specified in the following table:
Configuration 1 (Bank A only) is only supported if using bank A, populated with dual-rank FBDIMMs.
After installing FBDIMMs, use RBSU to configure the system for online spare memory support.
1A 1A 1A 1A 2B 2B 2B 2B
512 MB 512 MB 512 MB 512 MB Empty Empty Empty Empty Empty Empty Empty Empty
512 MB 512 MB 512 MB 512 MB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
DA - 12475 Canada — Version 15 — July 25, 2007
HP ProLiant ML350 Generation 5 (G5) HP ProLiant ML350 Generation 5 (G5) HP ProLiant ML350 Generation 5 (G5) HP ProLiant ML350 Generation 5 (G5)
Slot Slot Slot Slot
3C 3C 3C 3C 4D 4D 4D 4D 5A 5A 5A 5A
Empty Empty Empty Empty 512 MB 512 MB 512 MB 512 MB
2 GB 2 GB 2 GB 2 GB 512 MB 512 MB 512 MB 512 MB
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
6B 6B 6B 6B 7C 7C 7C 7C 8D 8D 8D 8D
Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty
2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
413507-B21
397409-B21
397411-B21
397413-B21
397415-B21
Page 34