Hitachi RAS-S18CPX Instruction Manual page 5

INDOOR UNIT INDICATORS
HITACHI
OPERATION INDICATOR
TEMPORARY SWITCH
G
Use this switch to start and stop when the remote controller does not work.
G
By pressing the temporary switch, the operation is done in automatic mode.
(EN1) RAS-S18CPX (1-5)
Black
OPERATION LAMP
This lamp lights during operation.
TIMER LAMP
This lamp lights when the timer is working.
FILTER LAMP
When the device is operated for a total of about 200
hours, the FILTER lamp lights to indicate that it is time
to clean the filter. The lamp goes out when the
"
device is on "STANDBY MODE".
TEMPORARY
SWITCH
– 5 –
5
(AUTO SWING)" button is pressed while the
G This figure shows the opening condition of
front panel. Refer to page 16 in relation to
how to open or close the front panel.
3/4/08, 19:18
TEMPORARY
SWITCH