Installation Instructions - Frigidaire FAZ12HS2AB Installation Instructions Manual

iNSTALLATiON iNSTRUCTiONS
Excessive Weight Hazard
Use two or more people to move and install
air conditioner,
Failure to do so can result in back or other injury.
4.
Pull on the handles to slide the air conditioner out of the
cabinet. Place the air conditioner on cardboard.
Remove packaging materials
[] Remove and dispose of/recycle packaging materials,
Remove tape and glue residue from surfaces before turning
on the air conditioner, Rub a small amount of liquid dish soap
over the adhesive with your fingers, Wipe with warm water
and dry.
[] Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
[] Handle the air conditioner gently.
1. Remove the air conditionerfrom the carton and place iton
cardboard,
A
A, Handle
NOTE: Do not lilt, push, pull or remove any expanded
polystyrene (foam)from inside the air conditioner. It is not
packing material.
2. Remove 1 shipping screw from each side of the cabinet.
A
A. Shipping screw
3. Remove front panel by removing 1 phillips screw from each
side of the front panel, Set screws aside and save.
°°°°6 A
A
A.front panel screw