Advertisement
m
Use 1" (2.5 cm) or thicker lumber lot wood |reme.
I'
A -,I
A, Outside width
B. Outside height
C, Depth
4, Apply the wood preservativeto the outsideexposedsurface.
5. Insertthe frame in the wall opening.Square and level lrame.
6. Attach |reme securelyto the wall.
install Cabinet _
_od
Frarne
1. Removetop channeland bothside channelsusinga 1/4 nut
driver or socket wrench.Discardtop channel and both side
channels.
!
21
Insertcabinetint_ the [reinedwall opening.Thetop of the
cabinetshould extend z/4(19.1 ram) intothe room.if there is
trim,the cabinet shouldextend 3/4(19.1 ram) past the trim.
B
A. 3/4 (19.1 rnm) exEending in_ room
B. Trim
3.
4.
5.
6.
7=
Use e levelto checkthat cabinetis levelside t_ side.
A. Level
Check thatairconditJoner cabinetistilted to the outsideso
that water will run to the outside.The cabinet shouldslope
at least hall-a-bubble towards the rear.
Reuse the Insulation to sealopeningbetween cablnetand
frame.
Use existingholesin sidesand _op of cabinetand 7 -#10 x
1" wood screws(not provided) to a_ch cabinetto frame.
NOTE. Do notove_ghLen screwsorthe cabinet willdistort
and providea poorairseal betweencabinetand air conditioner.
Caulkall outsidewall openings around cabinet.
A _i_
¸_ _
_w_
NOTE: Handle the air conditioner gently.
1. Make sure the free end of the ground wire Is outside of the
cabinet.
2. Insert air conditioner Into cabinet
_emlw
Weight Hazard
Ueo two or more I_oplo to move and inedall
air conditioner.
Failure to do eo can reeult In back or other Injury.
A
A. Make sure the free end of the ground wire Is outside of the cabinet
Advertisement
