Advertisement
Wall Sleeve Brands:
,#1 Emerson
1, Remove
existing
rear grille as shown
on Page 2 of this
manual
and replaoe
with provided
[ouvered
rear panel.
Instal[ as shown
here.
2,
h (i) 1" × 3/8" x 25" long seal in the center at the
top of the sleeve, Remove the backing t3aper and press
into position,
3,
h (2) ! _ x 3/8" x 14" seals to fl_e left and righ_ sides
of Me sleeve.
4, Cut (2) ! _ x 3/8!' x 25" long _als
to !4 '_long each
and attach to the vertical sections of the grille as shown,
5,
h (2)4 W' x 3 W ° x I W' centering/support
blocks
one on each side wall. Place in center of side wall with
the tapered end facing Me opening,
6, Gently slide unit into sleeve,
7, Before sliding al!-th_way
back, remove 2nd
from
front on left side of unit,
8, Remove 'the plastic washer
the screw,
9,
and attach the o_e_ end of _e ground wire to
the uni_ as shown in picture, Make sure that the
ed
washer is against the cabinet:,
10, Slide 'the unR completely
to the rear to ensure a good
seal, making sure the ground wire d_es not become
1!, Seal & Frame the unit as described
on the last page of
these inst_udions,
3
Advertisement
