Optional Accessory Use; Cleaning And Maintenance; Troubleshooting Guide; Tips - Thane Housewares H2O SteamFX User Manual

Handheld steamer kb-009a

Hide thumbs

Table Of Contents

Enlarged version

OPTIONAL ACCESSORY USAGE

Part and Usage

NYLON BRUSH

Metal/nylon brush can be attached to any of the steam nozzles.

The round nylon brush is great for

Attach the round metal/nylon brush by screwing onto the threaded end of the Jet

cleaning smooth hard surfaces, such as

Steam Lazer™

Nozzle or Long

toilets, sinks, and kitchen counters, etc.

It can be used with soap or detergent to

clean dirty areas.

METAL BRUSH

Can be used on hard surfaces that are not

pron to scratches, i.e. car rims, BBQ, etc.

MICROFIBER CLOTH FOR NYLON

Place the Microfiber cloth onto the nylon brush.

BRUSH

Use when you want to pick up the dirt

loosened by the steam.

EXTENSION HOSE

Insert the designated end of the

Extension Hose into the designated

This 75cm/30" Extension Hose is designed

hole in the Main Unit and then turn

for use with the following attachments:

- Window Cleaning Tool

the locking system.

- Duster

Steam Lazer™

- Long

DUSTER WITH CORAL CLOTH

Install the Coral Cloth into the Duster frame

Slowly pass over surface to be cleaned.

and attach the Duster to the Extension Hose.

The absorbent Coral Cloth picks up the

dirt loosened by the steam.

WINDOW CLEANING TOOL

Align the lock button on the Extension Hose

with the designated hole on the Window

Attached to the Extension Hose and in

Cleaning Tool Frame and push in the

combination with one of the available

Extension Hose until it locks in place.

cleaning cloths or scraper, use this tool

Install cleaning cloth of your choice onto the

for window cleaning, garment steaming,

Window Cleaning Tool.

wallpaper removal, etc.

Install the Coral Cloth over the

WINDOW CLEANING CORAL CLOTH

Window Cleaning Tool. Do not

Use it to clean windows, mirrors and glass.

cover the squeegee blade or scraper

when installing the cleaning cloth.

Make sure to attach the cloth to all

hooks

on the Clean ing Tool

to avoid slipping from the frame

during use.

GARMENT STEAMING CLOTH

Install the Garment Steaming Cloth or microfiber scrubbing cloth over the Window

Cleaning tool.

To steam a garment, place item of

clothing on a hanger and steam the

garment directly. Slowly slide the

Garment Steamer Head vertically over

the garment to smooth the fabric and

remove wrinkles and odors.

MICROFIBER SCRUBBING CLOTH

Removes more dust and dirt with less

Tag

effort. Effective in cleaning stubborn

smudges or spills.

LAZER™

Lazer™

LONG STEAM

Attach the Long Steam

the Extension Hose with the designated hole on the Long Steam

Easier to clean hard to reach areas (behind

until it locks in place.

the cabinets, behind the toilet, hard to

Attached to the Extension Hose, the Long Steam

reach coners, etc.).

with the Round Brush (Nylon). Remove the end cap before installing the Round Brush

(Nylon).

BENDABLE JET NOZZLE

Screw the Bendable Jet Nozzle onto the Long Steam Lazer

Cleans tight corners and hidden places.

plastic cap from the top of the Long Steam Lazer

attaching the Bendable Jet Nozzle.

Assembly

Tips/Caution

Use different color brushes for particular

cleaning areas (kitchen, bathroom, etc.)

Make sure the Extension Hose is securely

locked into place before use. When in use,

keep the Extension Hose away from your

body and avoid touching the hose as it

can get hot.

Do not pull the Extension Hose with

excessive force, as it might cause damage

and result in a steam leak.

Do not use steam on frozen windows.

Hooks

Be careful when using the steamer on

glass, as the glass may break.

Frame

front

Hooks

Some fabrics like leather, suede, and velvet

may not be suitable for steaming. Please

refer to the manufacturer's care label.

Curtains and draperies can be steamed

Black Tag

while hanging.

back

side

to the Extension Hose by aligning the lock button on

Lazer™

tool and push

Lazer™

can be used by itself or

™

. Remove the black

™

. Replace the plastic cap after

DISCONNECT THE UNIT FROM THE POWER OUTLET DURING CLEANING AND MAINTENANCE.

DO NOT IMMERSE THE H2O SteamFX™ HANDHELD STEAMER IN WATER.

WARING

Cleaning procedure to remove lime scale

If your H2O SteamFX™ begins to produce steam slower than usual or stops producing steam you may need to remove lime scale. It is necessary to

remove lime scale on a regular basis, every 25 times you use a full tank of water or once a month, especially in areas with hard water.

To remove lime scale from your H2O SteamFX™, please follow these procedures:

Using the Cleaning Pin

Swirl and push the pin up and down the small hole of the steam outlet. Ensure that all scale debris have been removed from the steam outlet

before reassembling any attachment.

Using a cleaning solution

1. Prepare a solution of 1/3 white vinegar and 2/3 water and add to the Water Tank.

2. Ensure that steam released is aimed away from or any surrounding objects. Plug the appliance into a properly grounded electrical outlet, turn it

ON and allow the unit to produce steam until the vinegar/water solution is used up.

3. Repeat the above procedure as many times as necessary until a normal steam flow is achieved.

4. Fill the Water Tank with fresh water and rinse out.

5. Fill the Water Tank with fresh water again, and release steam through the system until the Water Tank is empty.

6. Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no debris left in the system.

To clean calcium deposits building up inside the Water Tank:

Add 1-2 tablespoons of white vinegar to a full Water Tank, close the Water Tank cap and shake the contents. DO NOT TURN THE APPLIANCE ON. Let the

unit sit for a few hours. Empty the Water Tank and rinse with clean water until it rinses clear.

Cleaning blocked steamer accessories:

Due to the high mineral content of water in some areas, some calcium buildup might develop inside the tip of the Straight Nozzle. To clean it, we recommend

using a spray lubricant. Spray a small burst or two of the lubricant inside the tip of the Straight Nozzle. After spraying the lubricant, fill the steamer with

water and run a continuous jet of steam through the affected accessory for several minutes to remove the deposit.

WE RECOMMEND PERFORMING THIS PROCEDURE IN A PROTECTED AND WELL-VENTILATED AREA.

Problem

Possible Cause

The unit is not plugged in or turned ON

The unit does not power on

Water Tank is empty

Reduced steam or no steam

Blocked Steam Nozzle

Lime scale deposit

Attachment is improperly connected

Steam escapes from