Table of Contents
Advertisement
Installation
It's important to follow these installation steps exactly to ensure that the Secondary Display Adapter and
the monitor connected to it are detected by the N-series device. These steps assume that the N-series
device is powered down at the time of installation.
1. Connect the included USB cable to the Secondary
Display Adapter, and plug it into the lower USB port on
the back of the N-series device. Note that the
recommended port is marked as the keyboard port and
you will need to relocate your keyboard to one of the
USB ports on the front of the N-series device.
2. Connect your secondary display to the Secondary
Display Adapter via either the VGA or DVI port
(depending on the model you are using).
3. Make sure that both your primary and secondary
displays are powered on, then turn on your N-series
device.
Page 2 of 3
N-series SDA User Manual rev10.17.12
Advertisement
Table of Contents
Need help?
Do you have a question about the N500 and is the answer not in the manual?
Questions and answers