Quick Start - Adam Sub8 Operation Manual

Quick Start

• After having unpacked your subwoofer, please allow the system to acclimate to the
temperature of the room. Please do not connect the subwoofer for approximately an
hour.
• Make sure the power switch at the control panel is turned off.
• Decrease the volume of your audio system to protect your speaker and ears from
damage when switching the system on.
• Connect the provided power cord to the subwoofer.
• Connect the subwoofer with you're audio system via XLR(1)- or Chinch input (2).
• Switch power on at the control panel. By increasing the volume from your audio sys-
tem, you should now hear sound.
• To achieve the best possible sound reproduction, please see the following considera-
tions for speaker placement.
(1)
4
(2)