Connecting The Wiring; Installing The Hood - Frigidaire LFEV30FE Use & Care Manual

C O N N EC T W I R I N G
W A R N I N G : To r educe t he r i sk of el ect r i c shock,
m ake sur e pow er i s sw i t ched of f at t he ser vi ce
panel . Lock or t ag ser vi ce panel t o pr event pow er
f r om bei ng sw i t ched on acci dent al l y.
1 Connect H ouse W i r i ng (120 VAC) to hood. Use a piece of
C ar dboar d to protect the cooktop, if necessary.
2 Connect house black to hood black wire, house white to hood
white wire, and house ground under G r een G r ound Scr ew .
Securely tighten cable clamp onto house wiring.
I N STA LL H O O D
HOUSE
WIRING
( 120 VAC )
1 Hang hood from (4) M ount i ng Scr ew s. Slide hood towards
wall until mounting screws are engaged in narrow end of (4)
CARDBOARD
K eyhol es. Tighten mounting screws securely. A long
( U se t o pr ot ect
screwdriver works best.
cookt op)
2 Replace bottom cover.
3 Connect ductwork to hood. Use D uct Tape to make joints
secure and air tight.
GREEN
GROUND
SCREW
4 Install (2) PAR20, 50 W Maximum H al ogen B ul bs or (2) R16,
40 W Maximum I ncandescent B ul bs. Purchase bulbs
separately.
!
5 Replace filters, turn on power at service panel, and test for
proper operation.
5
KEYHOLE (4)
C A U TI O N :
B ul bs m ay be hot ! R ef er t o bul b packag-
i ng f or f ur t her i nf or m at i on.
MOUNTING SCREW (4)
DUCT
TAPE
PAR20,
50W MAX.
HALOGEN
BULB (2)
- or -
R16,
40W MAX.
INCANDESCENT
BULB (2)