Haier HWM50-10H User Manual page 14

b.Operating procedure and explanations for the
buttons
WATER
LEVEL
SELECTION
1 Press the "POWER ON/OFF" button to switch on
the power supply
After switching on, the washing machine heating function will be
automatically set inactive.
In order to select heating function, the " RESERVATION/CALEFACTION " button
should be pressed for more than 2 s until the heating indicator is lighted, which means
the heating function is selected. The initial status is 30
s e l e c t e d i f y o u p r e s s " R E S E R VA T I O N / C A L EF A C T I O N " b u t t o n a g a i n i n 3 s .
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.
2 Press the button of"
select a suitable full-automatic program
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "
indicator on. Refer to the "Button of '
paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
When "standard" program is selected, the washing
machine will perform full-automatically controlled fuzzy
program to set water level, water flow and wash duration
according to the cloth nature and weight
12
STANDARD
SURPLUS MIN
SOAK
JEANS
WASH
GENTLE
RINSE
QUICK WASH
SPIN
PROGRAM
PROCEDURE
SELECTION RESERV ATION
SELECTION
CALEFACTION
PROGRAM
PROGRAM/SELECTION
PROGRAM/SELECTION
POWER
START
ON/OFF
PAUSE
POWER
ON/OFF
, and 40 or 20 can be
"to
PROCEDURE
SELECTION
" to get the corresponding
'"
Page 10