3 Press the "WATER LEVEL" button to select suitable
water level
After switching on the power, press the button "WATER LEVEL" to select a water level according
to the load. Please refer to the button " Water level" on page 10.
4 Push the "
PROGRA M/RESERVA TION
to select suitable reserve program
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
"
PROGRAM/RESERVATION
Refer to The button of
Confirm the reserve program
"
When
Reservation
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
5 Press the "start/pause" button
Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
"
button over 2 seconds to set a reserved wash program.
"
PROGRAM/RESERVATION
"
becomes active, the nixie tube
Using process
Using process
" button
"
on page 10.
Page 10
the washing will finish
about 18 hours later
WATER LEVEL
Page 10
PROGRAM
RESERVATION
START
PAUSE
START
PAUSE
13