Ubee DDW2600 User Manual page 51

47
Identity
Remote endpoint
settings
Address group type
Subnet
Mask
Identity type
Identity
Network address type
Remote address
IPSec settings
Pre-shared Key
Phase 1 DH group
DDW2600/DDC2700
SAs.
The value of corresponding to selected Identity type.
Define the local network that will be protected by IPSec
VPN, located in peer wireless router LAN side.
Define the local address type,
- IP Subnet, to protect the whole subnet.
Single IP address, to protect a single PC
-
- IP address range, to protect several PCs
Subnet scale.
Subnet mask value.
Select different identity type to identity this wireless router
by
- WAN IP address
IP address
-
- FQDN
Email address
-
The value of corresponding to selected Identity type.
Filled in with the IP address or Domain name of the peer
IPSec VPN Gateway, you can select
IP address, usually suitable for static public IP address.
-
Fully Qualified Domain Name (FQDN), usually suitable
-
for dynamic public IP address.
Input IP address value when choose IP address in Network
address type. Input FQDN value when selected FQDN in
Network address type. This filed is used to identify specific
remote IPSec VPN gateway which your wireless router will
initiate IPSec VPN connection to.
Configure the IPSec Protocol related parameters
Type your pre-shared key in this field. A pre-shared key
identifies a
communicating party during a phase 1 IKE negotiation. It is
called "pre-shared" because you have to share it with
another party before you can communicate with them over a
secure connection.
Select which Diffie-Hellman key group (DHx) you want to
use for encryption keys. Choices are:
Web User Interface