Ubee DDW2600 User Manual page 50

46
Name
Delete tunnel
Add New Tunnel
Apply
Local endpoint Settings
Address group type
Subnet
Mask
Identity Type
DDW2600/DDC2700
Input the naming for identifying.
This button will delete the selected VPN
Once user inputted name in Name field, he can add this
tunnel
Quickly select certain VPN tunnel, and enable or disable it,
need to click apply.
Configure the local network that will be protected by IPSec
VPN, located in your wireless router LAN side.
Define the local address type,
IP Subnet, to protect the whole subnet.
-
Single IP address, to protect a single PC
-
- IP address range, to protect several PCs
Subnet scale.
Subnet mask value.
Select different identity type to identity this wireless router
by
WAN IP address
-
IP address
-
- FQDN
Email address
-
In Aggressive mode, VPN concentrator uses to identify
incoming SAs by ID type and content since this identifying
information is not encrypted, to distinguish between multiple
rules for SAs that connect from remote IPSec routers that
have dynamic WAN IP addresses.
In Main mode, the ID type and content are encrypted to
provide identity protection. In this case VPN concentrator
can only distinguish between up to 30 different incoming
SAs that connect from remote IPSec routers that have
dynamic WAN IP addresses. Because you can select
between five encryption algorithms (DES, 3DES, AES-128,
AES-192 and AES-256), two authentication algorithms
(MD5 and SHA1) and three key groups (DH1 and DH2,
DH5) when you configure a VPN rule. The ID type and
content act as an extra level of identification for incoming
Web User Interface